F10^®CL Veterinary Disinfectant is a concentrated veterinary disinfectant which achieves a broad spectrum kill of a wide range of potentially harmful micro-organisms affecting all species. It is active against bacteria, viruses, fungi and spores. It can also be used for the control of parasitic protozoal diseases such as cryptosporidiosis, coccidiosis andgiardiasis by eliminating the oocysts in the environment.

It is an excellent product for effectively achieving a high level of biosecurity. At recommended dilutions it is non-corrosive, non-tainting and non-irritating, is chlorine- and aldehyde-free, and can be used in presence of animals. For best results F10^®CL should be allowed to air dry - i.e. do not wash off.

Available in 5 litre bottles
Looking for a smaller size bottle? Please look at the F10^®SC, and see the information below

USES FOR F10^®CL VETERINARY DISINFECTANT

• Effective general disinfection of all hard surfaces (such as tables, floors and cages)
• For animal housekeeping procedures (such as the cleaning of food and water bowls and bedding)
• F10^®CL can be sprayed on and left to disinfect after cleaning to provide additional biosecurity - at recommended dilutions it can be used in the presence of animals
  
• Fogging of entire rooms and hard to reach surfaces
• Fogging of air spaces to eliminate air-borne micro-organisms

Note - F10^®CL should be used on surfaces which are already 'clean', but need disinfecting - i.e. remove any visible dirt from the surface before use. For a ‘one-step’ product for light duty cleaning, where a detergent is needed, use F10^®SCXD.

Use biocides safely. Always read the label and product information before use.

RECOMMENDED DILUTION RATES OF F10^®CL VETERINARY DISINFECTANT

The high dilution rates mean that F10^®CL is one of the most cost-effective disinfectant ranges on the market.

• General disinfection at 1:100 (10ml in 1 litre)
• High level disinfection against bacteria, fungi and most viruses (including coronavirus) at 1:50 (20ml to 1 litre)
• For use against the most resistant viruses such as Parvovirus or Circovirus (PBFD) at 1:25 (40ml in 1 litre)
• For the environmental control of the protozoal oocysts of cryptosporidium, coccidia and giardia use at 1:20 (50ml in 1 litre)

The F10^®SC and F10^®CL products are chemically the same but CL are 5 time more dilute than the SC (Super Concentrate). So 1 litre of CL is equivalent to 200ml of SC in terms of the amount of disinfection cleansing that it can do.

WHICH SHOULD I CHOOSE? F10^®SC, F10^®CL or F10^®READY TO USE?

Whichever you are more comfortable using, the end result will be the same as each provide the same high levels of safety and effective disinfection. Some prefer the Ready to Use as it is pre-diluted and can be sprayed straight from the bottle. The concentrates - F10^®SC and F10^®CL - are most cost effective, but need to be diluted at the correct rate. Some feel the CL is better for them as the dilution rate means that you will ultimately be less wasteful if you do not measure accurately (for high level disinfection you would use 20ml in 1 litre of water, whereas you would only use 4ml of SC in 1 litre of water). Whereas others prefer the SC as it is available in smaller bottles, so is a more space-efficient option.